Quality is our strength Price is our advantage
Back to products

Metal Oxides

Metal Oxides

Product range:

1. Metal oxide nanopowder (TiO2, ZrO2, Cr2O3, Fe2O3, CoO, NiO, CuO, Al2O3, MgO, ZnO; BaTiO3, YBa2Cu3O7-x, ZrO2-Y2O3, LnAlO3; Li(Na)MO2, РЗЭ2Ti(Zr)2O7, ИАГ)

2. Metal nanopowder (Ti, Cr, Fe, Co, Ni, Cu, РЗЭ)

3. Metal oxide thin films deposited on glass, quartz, silicon

4 Synthesis Technology (development of nanostructures and molecular complexes production technologies for specific tasks)

Method of synthesis

Our production method of ultra-disperse powders enables to obtain oxide nanopowders with tailored properties.
The production technology is based on modified sol-gel method of co-deposition of metal oxides.

Competitive advantage

  • High performance
  • Low cost
  • High quality (obtaining nanopowders of more valuable fractions)
  • Preparation of complex chemical compounds in a single step
  • Unlimited production volume

Application areas

  • Medicine
  • Transport
  • Energetics
  • Electronics
  • Metallurgy
  • Mechanical engineering

Application examples

  • Absorbent materials
  • Biocompatible materials
  • Nanocatalysts, nanocomposites
  • Magnetic nanoparticles for drug transportation
  • Hydrogen energy: production, separation and storage of hydrogen
  • Nanocomposite based broadband electromagnetic protection systems
  • Solid oxide fuel cells
  • Nanomaterials for electronics
  • Fine structural ceramics, high-strength alloys, magnetic nanomaterials, materials with special physical properties
  • Development of nano-modified coatings production technology
  • Development of nanoparticles based nanostructured wear and errozion resistant coatings with high resistance to corrosion in aggressive environments and improved tribological characteristics

Titanium oxide (TiO2)

Titanium oxide

Appearance: white or light yellow powder
Bulk density: 0.00 ± 0.01 g/cm3
Specific surface: 250 ± 2m2/g
The average pore size of: 1-5 nm
The pore volume of: 10 m2/g
Purity: not less than 99%

Chemical composition One phase of TiO2
Storage conditions Does not require special storage conditions. Warranty period of storage without losing basic properties - 2 years.
Packing 5 g, 25 g, 125 g, 250 g, 500 g
Chemical resistance Water Yes
0.1% trifluoroacetic acid Yes
0.1% formic acid Yes
2% acetic acid Yes
5% ammonia Yes
Piperidin 0.5% Yes
0.5% triethylamine Yes
100% acetonitrile Yes
100% methanol Yes
100% EtOH Yes
Carbon tetrachloride Yes
Hexane (and other solvents limits) Yes
Mineral acids No

Chromium oxide (Cr2O3)

Chromium oxide

Appearance: gray-green or green powder
Bulk density: 0.04 ± 0.01 g/cm3
Specific surface: 30 ± 2 m2/g
The average pore size of: 1-5 nm
Pore ​​volume: 10 ± 1m2g
Purity: not less than 99%

Chemical composition One phase of Cr2O3
Storage conditions Does not require special storage conditions. Warranty period of storage without losing basic properties - 2 years.
Packing 5 g, 25 g, 125 g, 250 g, 500 g
Chemical resistance Water Yes
0.1% trifluoroacetic acid Yes
0.1% formic acid Yes
2% acetic acid Yes
5% ammonia Yes
Piperidin 0.5% Yes
0.5% triethylamine Yes
100% acetonitrile Yes
100% methanol Yes
100% EtOH Yes
Carbon tetrachloride Yes
Hexane (and other solvents limits) Yes
Mineral acids No

Iron oxide (Fe2O3)

Iron oxide

Appearance: dark brown powder
Bulk density: 1.15 ± 0.01 g/cm3
Specific surface: 60 ± 2 m2/g
The average pore size of: 2-3 nm
Pore ​​volume: 35 ± 1 m2g
Purity: not less than 99%

Chemical composition One phase of Fe2O3
Storage conditions Does not require special storage conditions. Warranty period of storage without losing basic properties - 2 years..
Packing 5 g, 25 g, 125 g, 250 g, 500 g
Chemical resistance Water Yes
0.1% trifluoroacetic acid Yes
0.1% formic acid Yes
2% acetic acid Yes
5% ammonia Yes
Piperidin 0.5% Yes
0.5% triethylamine Yes
100% acetonitrile Yes
100% methanol Yes
100% EtOH Yes
Carbon tetrachloride Yes
Hexane (and other solvents limits) Yes
Mineral acids No

Nickel oxide (NiO)

Nickel oxide

Appearance: Black powder
Bulk density: 1.11 ± 0.01 g/cm3
Specific surface: 40 ± 2 m2/g
The average pore size of: 1-5 nm
Pore ​​volume: 7 ± 1 m2g
Purity: not less than 99%

Chemical composition One phase of NiO
Storage conditions Does not require special storage conditions. Warranty period of storage without losing basic properties - 2 years.
Packing 5 g, 25 g, 125 g, 250 g, 500 g
Chemical resistance Water Yes
0.1% trifluoroacetic acid Yes
0.1% formic acid Yes
2% acetic acid Yes
5% ammonia Yes
Piperidin 0.5% Yes
0.5% triethylamine Yes
100% acetonitrile Yes
100% methanol Yes
100% EtOH Yes
Carbon tetrachloride Yes
Hexane (and other solvents limits) Yes
Mineral acids No

Copper oxide (CuO)

Copper oxide

Appearance: Black powder
Bulk density: 1,67 ± 0,01 g3
Specific surface: 2 ± 2 m22/g
The average pore size of: 1-2 nm
Pore ​​volume: 2 ± 1 m2g
Purity: not less than 99%

Chemical composition One phase of CuO
Storage conditions Does not require special storage conditions. Warranty period of storage without losing basic properties - 2 years.
Packing 5 g, 25 g, 125 g, 250 g, 500 g
Chemical resistance Water Yes
0.1% trifluoroacetic acid Yes
0.1% formic acid Yes
2% acetic acid Yes
5% ammonia Yes
Piperidin 0.5% Yes
0.5% triethylamine Yes
100% acetonitrile Yes
100% methanol Yes
100% EtOH Yes
Carbon tetrachloride Yes
Hexane (and other solvents limits) Yes
Mineral acids No

Aluminum oxide (Al2O3)

Aluminum oxide

Appearance: white powder
Bulk density: 0.17 ± 0.01 g3
Specific surface: 360 ± 2 m2/g
The average pore size of: 2-3 nm
Pore ​​volume: 40 ± 1 m2g
Purity: not less than 99%

Chemical composition One phase of Al2O3
Storage conditions Does not require special storage conditions. Warranty period of storage without losing basic properties - 2 years.
Packing 5 g, 25 g, 125 g, 250 g, 500 g
Chemical resistance Water Yes
0.1% trifluoroacetic acid Yes
0.1% formic acid Yes
2% acetic acid Yes
5% ammonia Yes
Piperidin 0.5% Yes
0.5% triethylamine Yes
100% acetonitrile Yes
100% methanol Yes
100% EtOH Yes
Carbon tetrachloride Yes
Hexane (and other solvents limits) Yes
Mineral acids No
×